This version is limited to 5 minutes only, please purchase the Headunit Reloaded Emulator for the full version!
How to use the app?
USB Mode
Plug in the USB to your device (in case of tablet use an OTG cable), when prompted make sure you allow HUR to be the default app for the action and you check the always box.
If you are running the app on a device with Android 7.0 or higher, you might need to pull down the notification bar and select the connected USB device before the app starts (this is device dependent)
If the app does not start automatically when you plug in your phone, you can always open HUR, tap the USB button and select the phone from the list.
Wifi Mode
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start tethering (from the phone)
Connect your unit device running HUR to the newly created hotspot
Start HUR
Select Wifi
Wifi Direct Mode
Open HUR, press Wifi Direct and follow on-screen instructions
Self Mode (when Android Auto and HUR are running on the same device)
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start HUR
Select SelfMode
FAQ / Troubleshoot
All I get is a black screen
- If you are using an Android powered headunit (Joying, Xtrons, etc) look for a setting on your device which allows Video Playback during drive
- Try changing HUR settings and enable Software decoding
HUR crashes after start
- Try changing HUR setting and disable "Media Workaround"
Compatible with: Joying, Eonon, Grom Vline, Xtrons, PX5 and PX3 units, A-Sure, RK3188 units, RK3066 units, Avin and other Android powered head units.
More FAQ, including hardware key support, intent support and others as well troubleshooting can be found: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
If you have any difficulties using the app, or you any support with it, you are always welcome to contact me.
Diese Version ist auf 5 Minuten limitiert, bitte kaufen Sie den Headunit Reloaded Emulator für die Vollversion!
Wie benutzt man die App?
USB-Modus
Schließen Sie den USB an Ihr Gerät an (wenn das Tablet ein OTG-Kabel verwendet), stellen Sie bei Aufforderung sicher, dass HUR die Standard-App für die Aktion ist und Sie das Kontrollkästchen immer aktivieren.
Wenn Sie die App auf einem Gerät mit Android 7.0 oder höher ausführen, müssen Sie möglicherweise die Benachrichtigungsleiste herunterziehen und das angeschlossene USB-Gerät auswählen, bevor die App startet (dies ist geräteabhängig)
Wenn die App beim Anschließen des Telefons nicht automatisch startet, können Sie HUR immer öffnen, auf die USB-Taste tippen und das Telefon aus der Liste auswählen.
WLAN-Modus
Öffnen Sie Android Auto am Telefon, gehen Sie zu Info und tippen Sie zehnmal auf die Überschrift "About Android Auto", um ein Entwickler zu werden
Sobald Sie ein Entwickler sind, wählen Sie Start Headunit Server
Schließen Sie Android Auto
Starten Sie das Tethering (über das Telefon)
Verbinden Sie Ihr Gerät mit HUR mit dem neu erstellten Hotspot
Start HUR
Wählen Sie WLAN
WLAN-Direktmodus
Öffnen Sie HUR, drücken Sie Wifi Direct und folgen Sie den Anweisungen auf dem Bildschirm
Selbstmodus (wenn Android Auto und HUR auf demselben Gerät ausgeführt werden)
Öffnen Sie Android Auto am Telefon, gehen Sie zu Info und tippen Sie zehnmal auf die Überschrift "About Android Auto", um ein Entwickler zu werden
Sobald Sie ein Entwickler sind, wählen Sie Start Headunit Server
Schließen Sie Android Auto
Start HUR
Wählen Sie SelfMode
FAQ / Fehlerbehebung
Alles, was ich bekomme, ist ein schwarzer Bildschirm
- Wenn Sie ein mit Android betriebenes Steuergerät (Joying, Xtrons, usw.) verwenden, suchen Sie nach einer Einstellung auf Ihrem Gerät, die eine Videowiedergabe während der Fahrt ermöglicht
- Versuchen Sie, die HUR-Einstellungen zu ändern und die Software-Dekodierung zu aktivieren
HUR stürzt nach dem Start ab
- Ändern Sie die HUR-Einstellung und deaktivieren Sie "Media Workaround"
Kompatibel mit: Joying, Eonon, Grom Vline-, Xtrons-, PX5- und PX3-Einheiten, A-Sure, RK3188-Einheiten, RK3066-Einheiten, Avin und anderen Android-betriebenen Haupteinheiten.
Weitere FAQ, einschließlich Hardware-Schlüssel-Unterstützung, Intent-Unterstützung und andere sowie Fehlerbehebung finden Sie unter: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
Wenn Sie Schwierigkeiten haben, die App zu benutzen, oder Sie irgendeine Unterstützung damit haben, sind Sie immer willkommen, sich mit mir in Verbindung zu setzen.